ads
ads
For those of you who doesn’t satisfy enough with the computer and have advanced in the control of PC components, may never do a technique called overclocking. Here are some overclocking accessories that might be useful for you while doing overclocking, overclock either daily or who have more extreme overclock.
1. High RPM Fan
Use fans with high RPM is not unusual among overclockers who often “force” their hardware to run faster. Fan is capable of spraying with a strong wind will make the heatsinks are used to perform more optimally. Generally, the fan with RPM hard is intended for computer servers. However, you can still use it as one of the computers that support for a high overclock is not overheated.
If not found a label / information on that carried a maximum RPM fan, you can see the scale of existing Ampere fan on the label. Generally, a fan who has a magnitude Ampere (power) is larger will have a higher
RPM so you can estimate the ability of the fan without the need to look at the label specifications. Unfortunately, high RPM fan with quite hard to find in the market so that we can not recommend any type
of fan specifically.
Delta 120x120x38mm FFB1212EHE
This noisy fan has outstanding performance in the wind spout. The dynamo used allows the fan is spinning at a speed of 4000rpm. From the specs listed, this fan comes with the ability to move the wind up to
190CFM (cubic feet of minutes). To be sure, do not forget to pay attention to the maximum capacity that can be supplied by the PSU because the fan is big enough to suck up electricity, reached 3A.
2. Memory Cooler
The development of memory now increasingly led to the use of memory chip that has a high frequency. The frequent use of high frequency on the memory also resulting in increased operational temperature memory
and eventually helped quite a lot of manufacturers that create memory cooler as the escort memory. With the use of memory cooler, the temperature of the RAM memory can be reduced to be lower, thereby
reducing the risk of memory overheated when run at a higher frequency than the standard frequency.
• Corsair Airflow 2 Fan
It is the second series of memory cooler Corsair. The first series of cooler Corsair memory is Corsair Airflow Fan, only supports dual channel memory usage with a smaller fan. Corsair Airflow Fan 2 has a greater dimension to the use of 2 × 60 mm fan that makes the fan is much quieter and can spout more wind than the previous version. Fan also supports the use of triple-channel memory up.
• Kingston KHX Fan
Kingston Memory Cooler than have a shape and size are not much different with two Corsair Airflow Fan. Both use a fan 2 × 60 mm, silent, and support the use of triple-channel memory. Fan suitable for computer users who pay attention to her appearance from a PC because the second 60 mm fan that is used there is a blue LED that will enhance the appearance of PC users.
3. Thermalpaste
Material is often overlooked by the user’s PC. In fact, the material is actually named thermalpaste is what will fill the empty sidelines between the processor and heatsink that works to maximize heat transfer from the processor to the heatsink. Therefore, a better use of thermalpaste will make the heat transfer capability to be better too.
• Arctic Cooling MX-3
Thermalpaste Arctic Cooling has a performance that can be said to be very good in delivering heat. Also, pasta is not too thick so allows users to apply the paste to the processor or other places. Arctic
Cooling MX-3 including one thermalpaste that is not conductive so it will not cause a short-circuit / short if overflow or hit by accident.
http://www.jagatreview.com/wp-
• Thermalright Chill Factor 3
Is the next generation of output thermalpaste Thermalright very famous, namely Chill Factor 2. Thermalpaste It has an average grade of excellence thermalpaste such good performance that included, not conductive, and not easy to dry. Due thermalpaste has a higher viscosity level, it is advisable to flatten the first with a card that is given because it’s rather difficult thermalpaste flat if injected only in certain parts only.
4. Bench Table
• Lian-Li Pitstop T60
Lian-Li products is pretty much on the market. The price alone is approximately equivalent to full-tower chassis. Bench table is suitable for computer users who often tamper with the PC because the
available shelves that can be used to place other peripherals, such as
hard disks, power supply, and so forth. As one of the casing which has
a high quality, even Lian-Li embed features cable management, which is
also an advantage from this table bench.
http://www.jagatreview.com/wp-
• Dimastech Bench / Table Test v2.5 Hard
Perhaps the brand is less audible in public. But, for the overclocker,
the brand is quite famous. This brand is one of the favorite table
bench overclockers due to a simple form but is supported by the use of
high quality metal materials that are not easily damaged. With the
availability of locking containers for extreme cooling, this
benchtable have more value separately because it will greatly
facilitate the extreme overclockers to release LN2/Dry Ice pots to
perform troubleshooting. Benchtable is suitable for use by the casual
overclocker or extreme overclockers because there are some parts that
can be removed when not in use. Unfortunately this table bench still
is imported from Italy because no one has officially entered Dimastech
to Indonesia.
http://www.jagatreview.com/wp-
5. Watercooling
Generally, watercooling based cooling has a better performance than
normal heatsink. Until now, there are enough manufacturers
watercooling compact refrigerator makes it easier for users to either
the installation or maintenance. But, along with the development
heatsink that the longer the better, more compact watercooling
competitiveness is reduced because of its ability to cool the less
effective. If you want to get the performance was really good from a
watercooling, it is advisable to buy watercooling components
separately so that you can select those components as needed.
Thermaltake Big Typhoon 5 in 1 Heatpipe Cooler:
This behemoth of a heatsink utilizes a solid copper base connected to
6 copper heatpipes that intersect 142 aluminum fins! A silent 120mm
Thermaltake Big Typhoon fan pushes 54.4CFM at an almost inaudible
16dBA. Included are clips to allow for serious cooling of today’s
hottest super high performance processors.
Features:
• Application for Intel P4 LGA775 and AMD K7/K8
• 6 heatpipes transfer the heat quickly
• High density aluminum fins provide more surface area for good heat dissipation
• Copper base to ensure best performance
• 12cm silent fan provides excellent performance at only 16dBA
• Compatibility:
• Intel:
• P4 LGA775
• P4 478 Prescott FMB1.5
• AMD:
• Socket AM2
• Athlon 64
• Athlon 64 FX
• Athlon XP
• Sempron
Specifications:
• Heatsink Dimensions: 122 x 122 x 103mm
• Heatsink Material: Copper Base & Aluminum Fin
• Number of Fins: 142
• Fan Dimensions: 120 x 120 x 25mm
• Rated Voltage: 12V
• Starting Voltage: 7V
• Power Input: 3.6W
• Fan Speed: 1300rpm +/-10%
• Heatpipe: Copper Tube (ø6mm) x 6pcs
• Max Airflow: 54.4CFM
• Max Air Pressure: 1.86mm H2O
• Noise: 16dBA
• Connector: 3-pin
• Weight: 813g (28.70oz)
6. Waterblock
One component that is instrumental in determining the performance of
your watercooling. Waterblock serves as heat sink from the processor
and releasing heat at the water / coolant that is pumped into the
waterblock.
• EK Supreme HF
This product is output EK waterblock that has an excellent
performance in cooling your processor. In addition to performance
above average, this waterblock is also very inviting attention because
it is a transparent cover so that we can see the liquid that is used
on the waterblock. In the sales package provided some additional plate
to adjust the flow of water that will enter into the waterblock. By
using a plate with a hole at least, the cooling performance of the EK
Supreme HF will be better than the use of the plate with more holes.
http://www.jagatreview.com/wp-
• Swiftech Apogee XT
Who doesn’t know the fame and performance in the world Swiftech
watercooling? New Waterblock their output has increased fairly good
performance compared with previous Apogee series. One advantage of
this waterblock is the inlet (where the entering water) that can be
changed its position to allow this waterblock use fittings that are
large.
http://www.jagatreview.com/wp-
• Koolance CPU-340 CPU Cooler Water Block
A vast improvement over the earlier models, the Koolance CPU-340 CPU
Cooler provides a heightened heat transfer through its patented
design, allowing for ultra low temperatures in single or multi-core
configurations. With an array of high-quality materials (such as a
high-density solid copper cold plate, brass top, and anti-corrosive
nickel plating), users can expect a serious improvement over any
previous CPU coolers and water blocks they’ve installed in the past.
Also included in the CPU-340 Water Block is a universal mounting
adapter, as well as a standard G 1/4″ threading for any Koolance
nozzle diameter. Simply select the desired nozzle type for this base
model (which does not include nozzle) and easily attach the accessory.
Features:
1. Enhanced Heat Transfer
2. High Density Copper Place, Brass Top, & Nickel Plating
3. Standard G 1/4″ Threading
4. Universal Mounting Adapter
Includes the Following Components:
1. Cooling Block, Thermal Paste, Copper Sensor Tape, Mounting Hardware,
2. Instruction Manual
Specifications:
Dimensions: 2.4″ x 2.4″ x 0.63″
Weight : 1.10 lbs (508g)
Tubing Size: 3/8″ (10mm); 1/2″ (13mm) & 1/4″ (6mm) Available
Compatibility:
AMD AM2/AM2+ & 939/940/754
AMD “F” 1207
AMD “A” 462
Intel LGA775
Intel 478
Intel Xeon
7. CPU Cooler
• Zalman CNPS7000B-Cu LED CPU Cooler
The Zalman CNPS7000B-Cu CPU Cooler with a cool blue LED fan inside? Oh
Yeah! The CNPS7000B-Cu takes the tried and true 7000A and increases
its performance while shaving off a cool 18g of weight. The 7000B
packs a 92mm fan and a 3154 cubic centimeter pure copper heat
dissipation area! Designed for use with some of the hottest CPUs on
the market, Intel LGA775, Intel Pentium 4 (Socket 478), AMD
Duron/Athlon/Athlon XP (Socket 462), and Sempron/AMD64 (Socket
754/939/940), the CNPS7000B-Cu is a safe bet. And best of all, the
92mm fan coupled with the included FAN MATE 2 keeps your system
running cool silently.
Features:
1. Does not generate noise or vibration in Silent Mode
2. Pure Copper base material ensures excellent heat dissipation
3. Intel Pentium 4 (Socket 478), AMD Duron/Athlon/Athlon XP (Socket
462), and Sempron/AMD64 (Socket 754/939/940) compatible design for
broad compatibility
4. 92mm fan inside the HSF maximizes airflow and makes installation easier
5. The adjustable fan speed controller (FAN MATE 2) enables control of
noise and fan performance
6. Blue LED fan
Compatibility:
Intel:
1. P4 LGA775 – All Speeds (With Optional Clip Available Below)
2. P4 478 Willamette – All Speeds
3. P4 478 Northwood – All Speeds
4. P4 478 Prescott – All Speeds
AMD:
1. Duron 462 – All Speeds
2. Athlon 462 Thunderbird
3. Athlon XP 462 Palomino – All Speeds
4. Athlon XP 462 Thoroughbred – All Speeds
5. Athlon XP 462 Barton – All Speeds
6. Athlon 64 754 – All Speeds
7. Athlon 64 939 – All Speeds
8. Athlon 64 FX 939 – All Speeds
9. Athlon 64 FX 940 – All Speed
10. Opteron 940 – All Speeds
Dimensions: 109 x 109 x 62mm
Weight: 755g
Base Material: Pure Copper
Dissipation Area: 3154 cm2
Bearing Type: Double Ball Bearing
Speed: 1350~2600rpm +/- 10%
Thermal Resistance: 0.27~0.20 C/W
Noise Level: 18~27.5dBA +/- 10%
Fan Bearing: Dual Ball Bearing
Rotation Speed: 1350-2400 rpm
Heatsink Material: Copper
Cooler Compatibility: Socket 478, Socket 754, Socket 940, Socket 462, Socket 939
Processor Compatibility: Celeron, Pentium 4, Athlon, Athlon XP, Duron
Sound Emission: 18 dB
8. Radiator
This section plays an important role in releasing heat that is
absorbed by the waterblock from both the processor and GPU. The wider
surface which can be cooled radiator fan, the better the lower the
temperature of the radiator water used. If you only use one radiator
to cool the heat from the processor and GPU, we recommend to use the
radiator is at least able to accommodate the 3-4 fan on one side for
the water temperature can be lowered to maximum when it is high enough
to overclock.
• The Feser Company (TFC) X-Changer 360 Radiator
One of the radiator sizes is 3 × 120 mm, which is quite famous for
performance that could compete very closely with Thermochill PA 120.3
radiator output is legendary. The radiator is sized slightly thicker
than the average radiator size 3 × 120 mm but it is still possible to
put in a casing. Unfortunately, the high performance of this radiator
must be redeemed at a price that includes high-grade radiator.
http://www.jagatreview.com/wp-
• Danger Den Black Ice GTX480
Very long-sized radiator supports the use of up to 4 120 mm fans on
one side. The size of the radiator makes it rather difficult to put
into a PC chassis as most only support up to the radiator casing
measuring 3 × 120 mm. But the large size of the radiator is also
balanced by a fairly horrible performance because the radiator is able
to cool a processor and two GPUs well.
http://www.jagatreview.com/wp-
9. Extreme Cooling
• Kingpin F1 Gemini
LN2 Pot One of the most famous one made by overclockers from the
USA, namely K | ngP | n. Pot is specially designed for the use of LN2
is sold through a website that is www.kingpincooling.com. LN2 Pot
which is a refinement of the Dragon F1 EE LN2 Pot is quite unique
because of the use of the new pot design allows users to change the
base of this pot so it can adapt to the characteristics of processors
used. Gemini F1 in the future this will replace the Dragon F1 EE
already discontinue.
http://www.jagatreview.com/wp-
• SF3D Inflection Point
Pot designed by overclockers from Finland that is SF3D. Inflection
Point can be used with LN2 or dry ice without degrading performance.
The use of copper is mixed with aluminum made to reduce production
costs such pots. However, the mass of the smaller copper provides
convenience in controlling the temperature of the processor but still
able to withstand the burden of a large load. Including pots are
popular among overclockers Europe.
http://www.jagatreview.com/wp-
10. Insulation Materials
• Kneaded Eraser
One ingredient that can be used to make insulation motherboard or GPU
is kneaded eraser. Kneaded rubber eraser eraser itself is widely used
among painters. Removal is usually grayed out, is soft, and can be
shaped like a candle-shaped toy. The advantage of this insulating
material is its easy to stick to one another so that when we withdraw
from the motherboard kneaded eraser, rarely left the small flakes on
the sidelines of the transistors or small parts motherboard.
Unfortunately, the price of kneaded eraser in Indonesia is quite high
due to the use kneaded eraser is less popular in Indonesia.
http://www.jagatreview.com/wp-
• Paper Tak / Power Tack
If a bit difficult to find kneeded eraser or eraser kneeded if deemed
too expensive to just try to extreme cooling, there are alternate
solutions to make insulation. Replacement of insulation material that
can be used is the Paper No / Power Tack, who made such as rubber
which is commonly used in offices to attach the paper to a bulletin
board. Paper No / Power Tack itself has a range of prices far cheaper
than kneaded eraser, which is in the range of Rp20.ooo-Rp30.000. The
drawback of this material is easy to leave a small flake on small
components on the motherboard so that takes more time off Paper No /
Power Tack if used for insulation.
http://www.jagatreview.com/wp-
11. Thermometer
When do extreme overclocking, the thermometer is one of the tools
necessary to know the temperature of your processor because the
processor is generally when the temperature is below 0 degrees
Celsius, and the temperature reading device that is embedded on the
motherboard was not able to read the temperature with an accurate
thermometer, so we need a separate device.
Thermometer is available in the market are very many kinds. But, among
overclockers more frequently using a thermometer with a sensor type
K-Type. If you still try to do extreme overclocking, you can buy a
thermometer that has the ability to read temperatures up to about -60
with prices ranging between-Rp700.000 Rp500.000. However, if you want
a better thermometer, you can choose a thermometer with a temperature
reading range further and update speed read temperature much faster.
Of course, these advantages must be redeemed at a price that is much
more expensive.
• Tenmars TM-363
This thermometer includes a thermometer that has a low enough price,
but already has a read range of temperatures between minus 200 Celsius
to 1372 Celsius. Sensors are provided by K-Type is the type who can
read the temperature with reasonable accuracy and can read the
temperature in Celsius or Fahrenheit units. However, speed does not
update the temperature readings in real time with changes in
temperature on the sensor so that the overclockers need to familiarize
yourself to the temperature setting that is really optimal. However,
this thermometer still may be an option because the price is not too
high.
http://www.jagatreview.com/wp-
• Fluke 52-II
The thermometer is widely used by overclockers-top overclockers
because they have accurate readings and temperature readings have time
updates that can be said realtime. This thermometer can use different
types of sensors ranging from J, K, T, and E-Type and size can also be
read in Celsius, Fahrenheit, or Kelvin. Update rapid rate greatly
facilitate the overclockers in controlling the temperature when doing
extreme overclocking.
http://www.jagatreview.com/wp-
12. Computer Case
• X-Clear Acrylic Computer Case:
This new clear acrylic case is perfect for the show-off hardware
enthusiast. With a completely clear all-acrylic design, your case
interior will be highly visible at all angles. Perfect for lighting
and fan mods, this case can be custom fitted to your specifications.
The case comes in an easy to assemble format, with detailed
instructions on assembly. The design is sturdy, proven, and ready to
be fitted with all new hardware on the market. There are five 80mm fan
holes placed in key spots on the case, make sure to add fans below.
Various customizable options can be selected below, make sure to check
them out, as the pricing is better with the purchase of the case. The
fan upgrade option includes five fans of the noted type.
Features:
1. 4 x 5.25″ exposed bays
2. 2 x 3.5″ exposed bays
3. 5 x 3.5″ internal HDD bays
4. 4 x 80mm fan mounts: 1 x Side, 1 x Front, 1 x Rear, 1 x Top (Fans Optional)
5. Fits any Standard ATX motherboard (12″ x 10.2″)
6. All required mounting and assembly hardware included.
7. Dimensions: 445mm(H) x 220mm(W) x 475mm(D) or 17.5″(H) x (8.75″(W)
x 18.75″(D)
8. Weight (case only) – 5.8 KG or 13 lbs (Packaged) 7.0 KG or 15.5 lbs
ads
1. High RPM Fan
Use fans with high RPM is not unusual among overclockers who often “force” their hardware to run faster. Fan is capable of spraying with a strong wind will make the heatsinks are used to perform more optimally. Generally, the fan with RPM hard is intended for computer servers. However, you can still use it as one of the computers that support for a high overclock is not overheated.
If not found a label / information on that carried a maximum RPM fan, you can see the scale of existing Ampere fan on the label. Generally, a fan who has a magnitude Ampere (power) is larger will have a higher
RPM so you can estimate the ability of the fan without the need to look at the label specifications. Unfortunately, high RPM fan with quite hard to find in the market so that we can not recommend any type
of fan specifically.
Delta 120x120x38mm FFB1212EHE
This noisy fan has outstanding performance in the wind spout. The dynamo used allows the fan is spinning at a speed of 4000rpm. From the specs listed, this fan comes with the ability to move the wind up to
190CFM (cubic feet of minutes). To be sure, do not forget to pay attention to the maximum capacity that can be supplied by the PSU because the fan is big enough to suck up electricity, reached 3A.
2. Memory Cooler
The development of memory now increasingly led to the use of memory chip that has a high frequency. The frequent use of high frequency on the memory also resulting in increased operational temperature memory
and eventually helped quite a lot of manufacturers that create memory cooler as the escort memory. With the use of memory cooler, the temperature of the RAM memory can be reduced to be lower, thereby
reducing the risk of memory overheated when run at a higher frequency than the standard frequency.
• Corsair Airflow 2 Fan
It is the second series of memory cooler Corsair. The first series of cooler Corsair memory is Corsair Airflow Fan, only supports dual channel memory usage with a smaller fan. Corsair Airflow Fan 2 has a greater dimension to the use of 2 × 60 mm fan that makes the fan is much quieter and can spout more wind than the previous version. Fan also supports the use of triple-channel memory up.
• Kingston KHX Fan
Kingston Memory Cooler than have a shape and size are not much different with two Corsair Airflow Fan. Both use a fan 2 × 60 mm, silent, and support the use of triple-channel memory. Fan suitable for computer users who pay attention to her appearance from a PC because the second 60 mm fan that is used there is a blue LED that will enhance the appearance of PC users.
3. Thermalpaste
Material is often overlooked by the user’s PC. In fact, the material is actually named thermalpaste is what will fill the empty sidelines between the processor and heatsink that works to maximize heat transfer from the processor to the heatsink. Therefore, a better use of thermalpaste will make the heat transfer capability to be better too.
• Arctic Cooling MX-3
Thermalpaste Arctic Cooling has a performance that can be said to be very good in delivering heat. Also, pasta is not too thick so allows users to apply the paste to the processor or other places. Arctic
Cooling MX-3 including one thermalpaste that is not conductive so it will not cause a short-circuit / short if overflow or hit by accident.
http://www.jagatreview.com/wp-
• Thermalright Chill Factor 3
Is the next generation of output thermalpaste Thermalright very famous, namely Chill Factor 2. Thermalpaste It has an average grade of excellence thermalpaste such good performance that included, not conductive, and not easy to dry. Due thermalpaste has a higher viscosity level, it is advisable to flatten the first with a card that is given because it’s rather difficult thermalpaste flat if injected only in certain parts only.
4. Bench Table
• Lian-Li Pitstop T60
Lian-Li products is pretty much on the market. The price alone is approximately equivalent to full-tower chassis. Bench table is suitable for computer users who often tamper with the PC because the
available shelves that can be used to place other peripherals, such as
hard disks, power supply, and so forth. As one of the casing which has
a high quality, even Lian-Li embed features cable management, which is
also an advantage from this table bench.
http://www.jagatreview.com/wp-
• Dimastech Bench / Table Test v2.5 Hard
Perhaps the brand is less audible in public. But, for the overclocker,
the brand is quite famous. This brand is one of the favorite table
bench overclockers due to a simple form but is supported by the use of
high quality metal materials that are not easily damaged. With the
availability of locking containers for extreme cooling, this
benchtable have more value separately because it will greatly
facilitate the extreme overclockers to release LN2/Dry Ice pots to
perform troubleshooting. Benchtable is suitable for use by the casual
overclocker or extreme overclockers because there are some parts that
can be removed when not in use. Unfortunately this table bench still
is imported from Italy because no one has officially entered Dimastech
to Indonesia.
http://www.jagatreview.com/wp-
5. Watercooling
Generally, watercooling based cooling has a better performance than
normal heatsink. Until now, there are enough manufacturers
watercooling compact refrigerator makes it easier for users to either
the installation or maintenance. But, along with the development
heatsink that the longer the better, more compact watercooling
competitiveness is reduced because of its ability to cool the less
effective. If you want to get the performance was really good from a
watercooling, it is advisable to buy watercooling components
separately so that you can select those components as needed.
Thermaltake Big Typhoon 5 in 1 Heatpipe Cooler:
This behemoth of a heatsink utilizes a solid copper base connected to
6 copper heatpipes that intersect 142 aluminum fins! A silent 120mm
Thermaltake Big Typhoon fan pushes 54.4CFM at an almost inaudible
16dBA. Included are clips to allow for serious cooling of today’s
hottest super high performance processors.
Features:
• Application for Intel P4 LGA775 and AMD K7/K8
• 6 heatpipes transfer the heat quickly
• High density aluminum fins provide more surface area for good heat dissipation
• Copper base to ensure best performance
• 12cm silent fan provides excellent performance at only 16dBA
• Compatibility:
• Intel:
• P4 LGA775
• P4 478 Prescott FMB1.5
• AMD:
• Socket AM2
• Athlon 64
• Athlon 64 FX
• Athlon XP
• Sempron
Specifications:
• Heatsink Dimensions: 122 x 122 x 103mm
• Heatsink Material: Copper Base & Aluminum Fin
• Number of Fins: 142
• Fan Dimensions: 120 x 120 x 25mm
• Rated Voltage: 12V
• Starting Voltage: 7V
• Power Input: 3.6W
• Fan Speed: 1300rpm +/-10%
• Heatpipe: Copper Tube (ø6mm) x 6pcs
• Max Airflow: 54.4CFM
• Max Air Pressure: 1.86mm H2O
• Noise: 16dBA
• Connector: 3-pin
• Weight: 813g (28.70oz)
6. Waterblock
One component that is instrumental in determining the performance of
your watercooling. Waterblock serves as heat sink from the processor
and releasing heat at the water / coolant that is pumped into the
waterblock.
• EK Supreme HF
This product is output EK waterblock that has an excellent
performance in cooling your processor. In addition to performance
above average, this waterblock is also very inviting attention because
it is a transparent cover so that we can see the liquid that is used
on the waterblock. In the sales package provided some additional plate
to adjust the flow of water that will enter into the waterblock. By
using a plate with a hole at least, the cooling performance of the EK
Supreme HF will be better than the use of the plate with more holes.
http://www.jagatreview.com/wp-
• Swiftech Apogee XT
Who doesn’t know the fame and performance in the world Swiftech
watercooling? New Waterblock their output has increased fairly good
performance compared with previous Apogee series. One advantage of
this waterblock is the inlet (where the entering water) that can be
changed its position to allow this waterblock use fittings that are
large.
http://www.jagatreview.com/wp-
• Koolance CPU-340 CPU Cooler Water Block
A vast improvement over the earlier models, the Koolance CPU-340 CPU
Cooler provides a heightened heat transfer through its patented
design, allowing for ultra low temperatures in single or multi-core
configurations. With an array of high-quality materials (such as a
high-density solid copper cold plate, brass top, and anti-corrosive
nickel plating), users can expect a serious improvement over any
previous CPU coolers and water blocks they’ve installed in the past.
Also included in the CPU-340 Water Block is a universal mounting
adapter, as well as a standard G 1/4″ threading for any Koolance
nozzle diameter. Simply select the desired nozzle type for this base
model (which does not include nozzle) and easily attach the accessory.
Features:
1. Enhanced Heat Transfer
2. High Density Copper Place, Brass Top, & Nickel Plating
3. Standard G 1/4″ Threading
4. Universal Mounting Adapter
Includes the Following Components:
1. Cooling Block, Thermal Paste, Copper Sensor Tape, Mounting Hardware,
2. Instruction Manual
Specifications:
Dimensions: 2.4″ x 2.4″ x 0.63″
Weight : 1.10 lbs (508g)
Tubing Size: 3/8″ (10mm); 1/2″ (13mm) & 1/4″ (6mm) Available
Compatibility:
AMD AM2/AM2+ & 939/940/754
AMD “F” 1207
AMD “A” 462
Intel LGA775
Intel 478
Intel Xeon
7. CPU Cooler
• Zalman CNPS7000B-Cu LED CPU Cooler
The Zalman CNPS7000B-Cu CPU Cooler with a cool blue LED fan inside? Oh
Yeah! The CNPS7000B-Cu takes the tried and true 7000A and increases
its performance while shaving off a cool 18g of weight. The 7000B
packs a 92mm fan and a 3154 cubic centimeter pure copper heat
dissipation area! Designed for use with some of the hottest CPUs on
the market, Intel LGA775, Intel Pentium 4 (Socket 478), AMD
Duron/Athlon/Athlon XP (Socket 462), and Sempron/AMD64 (Socket
754/939/940), the CNPS7000B-Cu is a safe bet. And best of all, the
92mm fan coupled with the included FAN MATE 2 keeps your system
running cool silently.
Features:
1. Does not generate noise or vibration in Silent Mode
2. Pure Copper base material ensures excellent heat dissipation
3. Intel Pentium 4 (Socket 478), AMD Duron/Athlon/Athlon XP (Socket
462), and Sempron/AMD64 (Socket 754/939/940) compatible design for
broad compatibility
4. 92mm fan inside the HSF maximizes airflow and makes installation easier
5. The adjustable fan speed controller (FAN MATE 2) enables control of
noise and fan performance
6. Blue LED fan
Compatibility:
Intel:
1. P4 LGA775 – All Speeds (With Optional Clip Available Below)
2. P4 478 Willamette – All Speeds
3. P4 478 Northwood – All Speeds
4. P4 478 Prescott – All Speeds
AMD:
1. Duron 462 – All Speeds
2. Athlon 462 Thunderbird
3. Athlon XP 462 Palomino – All Speeds
4. Athlon XP 462 Thoroughbred – All Speeds
5. Athlon XP 462 Barton – All Speeds
6. Athlon 64 754 – All Speeds
7. Athlon 64 939 – All Speeds
8. Athlon 64 FX 939 – All Speeds
9. Athlon 64 FX 940 – All Speed
10. Opteron 940 – All Speeds
Dimensions: 109 x 109 x 62mm
Weight: 755g
Base Material: Pure Copper
Dissipation Area: 3154 cm2
Bearing Type: Double Ball Bearing
Speed: 1350~2600rpm +/- 10%
Thermal Resistance: 0.27~0.20 C/W
Noise Level: 18~27.5dBA +/- 10%
Fan Bearing: Dual Ball Bearing
Rotation Speed: 1350-2400 rpm
Heatsink Material: Copper
Cooler Compatibility: Socket 478, Socket 754, Socket 940, Socket 462, Socket 939
Processor Compatibility: Celeron, Pentium 4, Athlon, Athlon XP, Duron
Sound Emission: 18 dB
8. Radiator
This section plays an important role in releasing heat that is
absorbed by the waterblock from both the processor and GPU. The wider
surface which can be cooled radiator fan, the better the lower the
temperature of the radiator water used. If you only use one radiator
to cool the heat from the processor and GPU, we recommend to use the
radiator is at least able to accommodate the 3-4 fan on one side for
the water temperature can be lowered to maximum when it is high enough
to overclock.
• The Feser Company (TFC) X-Changer 360 Radiator
One of the radiator sizes is 3 × 120 mm, which is quite famous for
performance that could compete very closely with Thermochill PA 120.3
radiator output is legendary. The radiator is sized slightly thicker
than the average radiator size 3 × 120 mm but it is still possible to
put in a casing. Unfortunately, the high performance of this radiator
must be redeemed at a price that includes high-grade radiator.
http://www.jagatreview.com/wp-
• Danger Den Black Ice GTX480
Very long-sized radiator supports the use of up to 4 120 mm fans on
one side. The size of the radiator makes it rather difficult to put
into a PC chassis as most only support up to the radiator casing
measuring 3 × 120 mm. But the large size of the radiator is also
balanced by a fairly horrible performance because the radiator is able
to cool a processor and two GPUs well.
http://www.jagatreview.com/wp-
9. Extreme Cooling
• Kingpin F1 Gemini
LN2 Pot One of the most famous one made by overclockers from the
USA, namely K | ngP | n. Pot is specially designed for the use of LN2
is sold through a website that is www.kingpincooling.com. LN2 Pot
which is a refinement of the Dragon F1 EE LN2 Pot is quite unique
because of the use of the new pot design allows users to change the
base of this pot so it can adapt to the characteristics of processors
used. Gemini F1 in the future this will replace the Dragon F1 EE
already discontinue.
http://www.jagatreview.com/wp-
• SF3D Inflection Point
Pot designed by overclockers from Finland that is SF3D. Inflection
Point can be used with LN2 or dry ice without degrading performance.
The use of copper is mixed with aluminum made to reduce production
costs such pots. However, the mass of the smaller copper provides
convenience in controlling the temperature of the processor but still
able to withstand the burden of a large load. Including pots are
popular among overclockers Europe.
http://www.jagatreview.com/wp-
10. Insulation Materials
• Kneaded Eraser
One ingredient that can be used to make insulation motherboard or GPU
is kneaded eraser. Kneaded rubber eraser eraser itself is widely used
among painters. Removal is usually grayed out, is soft, and can be
shaped like a candle-shaped toy. The advantage of this insulating
material is its easy to stick to one another so that when we withdraw
from the motherboard kneaded eraser, rarely left the small flakes on
the sidelines of the transistors or small parts motherboard.
Unfortunately, the price of kneaded eraser in Indonesia is quite high
due to the use kneaded eraser is less popular in Indonesia.
http://www.jagatreview.com/wp-
• Paper Tak / Power Tack
If a bit difficult to find kneeded eraser or eraser kneeded if deemed
too expensive to just try to extreme cooling, there are alternate
solutions to make insulation. Replacement of insulation material that
can be used is the Paper No / Power Tack, who made such as rubber
which is commonly used in offices to attach the paper to a bulletin
board. Paper No / Power Tack itself has a range of prices far cheaper
than kneaded eraser, which is in the range of Rp20.ooo-Rp30.000. The
drawback of this material is easy to leave a small flake on small
components on the motherboard so that takes more time off Paper No /
Power Tack if used for insulation.
http://www.jagatreview.com/wp-
11. Thermometer
When do extreme overclocking, the thermometer is one of the tools
necessary to know the temperature of your processor because the
processor is generally when the temperature is below 0 degrees
Celsius, and the temperature reading device that is embedded on the
motherboard was not able to read the temperature with an accurate
thermometer, so we need a separate device.
Thermometer is available in the market are very many kinds. But, among
overclockers more frequently using a thermometer with a sensor type
K-Type. If you still try to do extreme overclocking, you can buy a
thermometer that has the ability to read temperatures up to about -60
with prices ranging between-Rp700.000 Rp500.000. However, if you want
a better thermometer, you can choose a thermometer with a temperature
reading range further and update speed read temperature much faster.
Of course, these advantages must be redeemed at a price that is much
more expensive.
• Tenmars TM-363
This thermometer includes a thermometer that has a low enough price,
but already has a read range of temperatures between minus 200 Celsius
to 1372 Celsius. Sensors are provided by K-Type is the type who can
read the temperature with reasonable accuracy and can read the
temperature in Celsius or Fahrenheit units. However, speed does not
update the temperature readings in real time with changes in
temperature on the sensor so that the overclockers need to familiarize
yourself to the temperature setting that is really optimal. However,
this thermometer still may be an option because the price is not too
high.
http://www.jagatreview.com/wp-
• Fluke 52-II
The thermometer is widely used by overclockers-top overclockers
because they have accurate readings and temperature readings have time
updates that can be said realtime. This thermometer can use different
types of sensors ranging from J, K, T, and E-Type and size can also be
read in Celsius, Fahrenheit, or Kelvin. Update rapid rate greatly
facilitate the overclockers in controlling the temperature when doing
extreme overclocking.
http://www.jagatreview.com/wp-
12. Computer Case
• X-Clear Acrylic Computer Case:
This new clear acrylic case is perfect for the show-off hardware
enthusiast. With a completely clear all-acrylic design, your case
interior will be highly visible at all angles. Perfect for lighting
and fan mods, this case can be custom fitted to your specifications.
The case comes in an easy to assemble format, with detailed
instructions on assembly. The design is sturdy, proven, and ready to
be fitted with all new hardware on the market. There are five 80mm fan
holes placed in key spots on the case, make sure to add fans below.
Various customizable options can be selected below, make sure to check
them out, as the pricing is better with the purchase of the case. The
fan upgrade option includes five fans of the noted type.
Features:
1. 4 x 5.25″ exposed bays
2. 2 x 3.5″ exposed bays
3. 5 x 3.5″ internal HDD bays
4. 4 x 80mm fan mounts: 1 x Side, 1 x Front, 1 x Rear, 1 x Top (Fans Optional)
5. Fits any Standard ATX motherboard (12″ x 10.2″)
6. All required mounting and assembly hardware included.
7. Dimensions: 445mm(H) x 220mm(W) x 475mm(D) or 17.5″(H) x (8.75″(W)
x 18.75″(D)
8. Weight (case only) – 5.8 KG or 13 lbs (Packaged) 7.0 KG or 15.5 lbs
0 comments